Expert Answers about Kia Hitch Pins and Clips
- What is Difference Between Patriot Hitches Adjustable Ball Mounts PH54FR and PH67SR
- The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part # PH67SR has black pin and clips whereas the # PH54FR has red ones.
view full answer... - Comparing The Available Trailer Hitches For A 2008 Cadillac CTS
- All of the hitches available for the 2008 Cadillac CTS have the same characteristics in terms of towing and tongue weight capacity. Each hitch has a 2000 pound towing capacity and 200 pound tongue weight capacity.
Where they differ is the towing components included with the hitch. The Draw-Tite Trailer Hitch, part # 24767, which is the lower priced hitch, does not include a drawbar, pin or clip. The Curt Hitch, part # 11307, which is the highest priced hitch for your vehicle includes a...
view full answer... - Difference In Draw-Tite Class IV Hitch Compared To Lower Priced Class IV Hitch
- When comparing the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class IV, part # 41929, to the Curt Trailer Hitch Receiver - Class IV, part # 14361, they are similar, but the new version of the Draw-Tite # 41929 is rated higher. The Draw-Tite Class IV Hitch has a tongue weight capacity of 1,200 pounds and towing capacity of 12,000 pounds. The Curt Class IV Hitch has a tongue weight capacity of 1,000 pounds, and towing capacity of 10,000 pounds. Both part # 41929, and part # 14361 have...
view full answer... - What is the Difference Between the Curt # C13409 and the Draw-Tite # 76271 for a 2021 Forester?
- There is only one main difference between the Curt Hitch # C13409 and the Draw-Tite Hitch # 76271 for the 2021 Subaru Forester. That difference involves the bumper clearance measurement of the shanks. While the Curt measures 4 inches from the center of the shank's pinhole to the outer surface of the Forester's bumper, the Draw-Tite has a 5-inch length. The extra inch of the Draw-Tite will be advantageous of you are looking to purchase accessories that require you to clear the rear bumper.
As...
view full answer... - Difference in Dimensions Between P313 and P333 Hitch Receiver Insert for Swagman Bike Racks
- I went out to our warehouse and took some measurements for you. The # P313 Replacement Receiver Insert measures 1.31 in x 0.87 in while # P333 measures a bit smaller at 1.30 in x 0.75 in. See the attached images.
# P313 is designed to replace the original insert in these Swagman hitch mounted bike racks:
Swagman XC # S64650
Swagman G10 # S64682 (discontinued)
Swagman Trailhead # S63360
# P333 is designed to replace the original insert in these Swagman hitch mounted bike racks:
Swagman...
view full answer... - Hitch Recommendation for 2013 GMC Terrain
- The biggest difference between the discontinued Hidden Hitch part # 87572, and the Curt Hitch part # 13591 that you referenced is the round tube vs. square tube. Another difference is that the Draw-Tite hitch uses a couple more attachment points. Either would work great for you. If it was me, I would probably go with the Draw-Tite based on the price difference.
To complete your towing setup you may also be interested in the Curt Trailer Wiring Harness part # 56094. Installation vid and...
view full answer... - Draw-Tite and Curt Trailer Hitch Comparison for 2016 Mazda CX-5
- Both the Curt Hitch Class III Reciever # C13315 and Draw-Tite Class III Reciever # 76138 are confirmed to fit on your 2016 Mazda CX-5. Both receivers are basically identical as they have the same weight bearing capabilities and install in the same manner.
If you are interested in using your hitch for towing, you will need a hitch ball, ball mount and pin and clip. I recommend the T-One Vehicle Wiring Harness # 118563 and our hitch ball mount kit # 989900 which comes with two hitch balls,...
view full answer... - Aluminum Ball Mount Selection For 2005 Jeep Liberty
- A difference in length of your hitch, or ball mount will effect the clearance from the trailer to the rear of your Jeep Liberty. What you would want to do is measure the clearance needed on your Jeep Liberty. To measure the clearance needed, you will want to measure from the center of the hitch pin hole out 8-1/4 Inches. This will be the location of your hitch ball. Then what you can do is move your trailer and position the coupler to that approximate location to see if there will be any...
view full answer... - Comparing etrailer e98874 and Curt # C18152 2-Inch Hitch Cargo Carriers
- Both the etrailer # e98874 and Curt # C18152 2-inch hitch cargo carriers will fit the 2-inch Class III hitch on your 2015 Lexus GX 460. Both feature steel construction and a 500-lb capacity but they differ in a few respects.
The etrailer offers 9-1/2-inches of clearance from the hitch pin hole when it is folded up in the storage position while the Curt # C18152 does not fold. You can simply measure from your hitch pin hole to the rear-most part of the car to determine how much clearance...
view full answer... - What is the Difference Between the C99FR and Curt Part Number 13453
- The Curt part number 13453 and our part # C99FR are the same hitch and will fit on your 2021 Toyota Highlander. We often use our own part numbers, so this is the only difference; you're still getting the same high quality Curt hitch for your vehicle.
If you're going to be towing with your new hitch you'll also need a wiring harness, ball mount, hitch ball, hitch pin and clip. For the wiring I recommend using the Curt # C59236, which comes with quick splice connectors and uses a powered...
view full answer... - comparing Curt Class III and IV Trailer Hitches for a 2001 Ford F-150
- The main difference between the Curt trailer hitch # C14355 and hitch # 13355, is capacity. Both hitches feature a 2 inch receiver. Both hitches will fit on your truck if it has a 20 inch or smaller spare tire. But the key is the weight capacity of each hitch.
The Class IV trailer hitch, # C14355, has a tongue weight capacity of 1,000 pounds, and a gross trailer weight capacity of 10,000 pounds. When used with weight distribution, those ratings increase to 1,200/12,000 pounds. Keep in...
view full answer... - What is the Difference Between the Draw-Tite and Hidden Hitch Available for a 2008 Mazda 5
- The two hitches we offer for the Mazda5 are very similar since designed for the same vehicle; quality wise they are very comparable too. The Hidden Hitch model comes with a drawbar and pin and clip where the Draw-Tite does not.
view full answer... - Comparison of Draw-Tite Trailer Hitch # 75726 and Curt Hitch # 13534 for a 2008 Toyota Highlander
- Both the Curt Trailer Hitch, # 13534, and the Draw-Tite Hitch, # 75726 for a 2008 Toyota Highlander will install in very much the same way. I have included installation instructions for both hitches below for comparison. I have also included video links showing installation of each hitch.
Although the Draw-Tite model has a higher capacity at 7500 lbs towing and 750 lbs tongue weight, you will still be limited by the vehicle manufacturers stated towing capacity, which is a maximum of 5000...
view full answer... - Comparing The Swagman XC And The Swagman XTC-2 Bike Racks
- For your 2008 VW Rabbit, a hitch mounted bike rack is a great option. The two bike racks you are looking at are both good options. The Swagman XC 2-Bike Rack # S64650 will be compatible with class I thru class III hitches, has sliding wheel loops and ratcheting hooks that hold your bike frame. It has a shank rise of 4 inches to help with ground clearance and has a weight capacity of 35 lbs per bike or 70 lbs total. It comes with an anti-rattle pin and clip. The maximum wheel base is...
view full answer... - Trailer Hitch Recommendation for 2013 Toyota Prius to Use with Cargo Carrier
- You are correct that the main difference between Draw-Tite and Hidden Hitch is that Hidden Hitch included the recommended drawbar and pin and clip. Draw-Tite and Hidden Hitch's parent company, Cequent, has phased out the Hidden Hitch brand, so for your 2013 Toyota Prius, you will want the Draw-Tite Class I Sport Frame Receiver Hitch # 24847
I highly recommend this trailer hitch for you to carry your cargo carrier. The Draw-Tite trailer hitch will not require any drilling or welding for...
view full answer... - Comparison Between Hidden Hitch and Draw-Tite Class I Hitches Available for 2010 Mazda 3 Hatchback
- The only difference between the Hidden Hitch # 60259 (no longer available) and the Draw-Tite # 24843 Class I hitch is the fact that the Hidden Hitch model includes the drawbar and the pin and clip used to secure the drawbar into the receiver.
Hidden Hitch and Draw-Tite are owned by the same parent company, Cequent Performance Products. The hitches are identical except for brand name sticker affixed to them. If you might be towing with the hitch, the Hidden Hitch model would be the way...
view full answer... - Comparing Folding Cargo Carrier to Fixed Shank Carrier for Noise and Movement
- You are correct that the 24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs # 63153 will have less play because it doesn't have that pivot. You can even add an anti-rattle hitch lock like # 63232 to further eliminate movement.
The folding feature of the 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - 500 lbs # e98874 is really nice for storage and clearance when not in use. The pivot will allow some play but not as much as you may imagine. You can tighten the bolt to help...
view full answer... - What is the Difference Between the Draw-Tite and Hidden Hitch Available for a 2007 Toyota Camry LE
- The Hidden Hitch, part # 90152 (no longer available), and the Draw-Tite, part # 36416 are essentially the same hitches. Draw-Tite and Hidden Hitch are sister companies and these hitches were probably built using the same jigs. The difference is, as you saw, the Hidden Hitch is packaged with the proper drawbar, pin and clip, sort of a complete starter kit.
view full answer... - Differences Between Curt Cargo Carrier # C18145 And Reese Cargo Carrier # 63155
- The first thing you will want to do is check your owner's manual or with your dealer and find out what the tongue weight capacity is for your 2010 Smart fortwo. Many time carriers have a weight rating much higher than the vehicle capacity and you do not want to exceed the lower of the ratings.
There are several differences between the Reese Cargo Carrier, part # 63155, and the Curt Cargo Carrier, part # C18145. An important thing to note would be the weight of the carrier alone. The Curt...
view full answer... - Trailer Hitch Comparison for 2016 Chevy Impala
- The only difference between the Hidden Hitch # 90242 (no longer available) and the Draw Tite Hitch part # 36538 that you referenced is that the Hidden Hitch comes with a ball mount and a hitch pin and clip. Aside from that they are identical hitches.
Curt is a different company so while the design is very similar, the hitch is made slightly different. The biggest differences are that Curt hitches are made in the USA and they require a stabilizer strap like part # 18050 when used with a...
view full answer...
Go To Results